DIRECTORY
CART ()
Check Out
Home
Anchor Bracket / Holder
Bench & Seat
Bimini Boat Top Accessories
Bungee Cord
Carabiner&Carbine Snap
Door Stopper
Drain Tube
Drink Cup Holder
Fishing Rod Holder
Flag & Flag Pole
Grab Rail
Hatch Telescoping Adjuster
Hinge
Hook Holder Clip
Hooks
Ladder&Accessories
Latch
Lift Handle
Light
Other
Pad eye
Plugs
Rowlock/Oarlock Socket
Soft Wood
Stainless-Steel Mooring Spring
Steering wheel & accessories
Table Bracket
U-Bolt
Vent
About Us

Pacific Marine Hardware Inc.
15800 El Prado Rd. Unit B
Chino, CA 91710 United States
Toll-Free: 888-884-4818
Phone: 909-288-3442, Fax: 888-887-5838
E-Mail: bluewhalehardware@gmail.com


Search Our Store
Item # Description

Minimum Order: $100.00

We accept OEM order!
Please call our Toll Free number for prices and availability (888) 884-4818

Our products are made with the finest quality materials!

(*) in price column means Quantity Discounts Available!
Click on item name to see full details and picture if available.

  Item # Description Price Unit
BL91560102 15-1/2" Boat Stainless Steel Steering Wheel with Black Foam Grip
*Diameter: 15-1/2", Shaft: 3/4", Dish: 25°, Fits 3/4" (1.91 cm) tapered shafts. *Made of Polished finish 304-grade stainless steel. *This item Black plastic center cap is included.
CALL box of 10
BL31510288 2" Round 316 Stainless Steel Hatch Flush Pull Slam Latch
*Made of Casting 316 Stainless Steel. 2 Point Fixing, Easy Install and replace the old one. *Size: Flange diameter:2-2/5"(61 mm), Installation Hole diameter 2" (50 mm)
CALL box of 10
BL31122499 24" × 13" Well Mount Fold Down Bench with Slats for Boat, Shower
*Bench length: 24", Bench Width: 13", Brackets mount at 16" on center, Weight capacity: 300 lb. *Ideal for Boat, Shower Room, Steam, Sauna Room and a wide variety of place.
CALL box of 5
BL311212499 24" × 13" Well Mount Fold Down Bench/ Seat with Slats for Boat, S
*Folding brackets are made of 304 Stainless Steel; the bench is made of solid teak board slat. *Bench length: 24", Bench Width: 13", Brackets mount at 16" on center. *Ideal for Boat, Shower Room, Steam, Sauna Room and a wide variety of place.
CALL box of 5
BL13510251 3" Round 316 Stainless-Steel Inspection Deck Plate for Boat
*Made of Investment Cast 316 Stainless Steel. *Flange: 4-11/16", Plate Inside Diameter: 3".
CALL box of 5
BL31123099 30" × 13" Well Mount Fold Down Bench with Slats for Boat, Shower
*Folding brackets are made of 304 Stainless Steel, the bench is made of solid teak board slat *Bench length: 30", Bench Width: 13", Brackets mount at 16" on center *Ideal for Boat, Shower Room, Steam, Sauna Room and a wide variety of uses.
CALL box of 5
BL74510127 304 Stainless Steel 6 Point Fixing Door Strap Hinge 7.1" ×1.63"
Made of Polished finish 304-grade stainless steel. Overall length:180.9 mm / 7.1 inch Thickness: 2mm / 0.08 inch Screw holes diameter:5.4 mm / 0.2 inch
CALL box of 20(10pair)
BL29580453 304 Stainless Steel Bimini Boat Top PAD EYE, Eye Strap XS
Bimini Boat Top PAD EYE, Eye Straps, Tie Down, Kayak Deck Loops, Tie Down Anchor Point, footman's loop. Made of 304 stainless steel. Overall Length: 46 mm / 1.81inch Length between holes center: 35 mm / 1.38 inch Height:16 mm / 0.63 inch Weight: 0.005 kg / 0.18 oz.
* 0.00 box of 10
BL29580853 304 Stainless Steel Bimini Boat Top PAD EYE, Eye Strap-size: L
Bimini Boat Top PAD EYE, Eye Straps, Tie Down, Kayak Deck Loops, Tie Down Anchor Point, footman's loop. Made of 304 grade stainless steel. Overall Length: 63 mm / 2.48inch Length between holes center: 49 mm / 1.93inch Height:25 mm / 0.98 inch Weight: 0.026 kg /0.92 oz.
CALL box of 10
BL29581053 304 Stainless Steel Bimini Boat Top PAD EYE, Eye Strap-size: XL
Bimini Boat Top PAD EYE, Eye Straps, Tie Down, Kayak Deck Loops, Tie Down Anchor Point, footman's loop. Made of 304 grade stainless steel. Overall Length: 80 mm / 3.15inch Length between holes center: 63 mm / 2.48inch Height:32 mm / 1.26 inch Weight: 0.053 kg / 1.87 oz.
CALL box of 10
BL32588764 304 Stainless Steel Hidden Hinges(L)
Made of high quality 304 stainless steel. Length:106 mm / 4.2 inch Length between holes center: 83 mm / 3.3 inches Height:31mm / 1.22 inch Door thickness: ≥ 32 mm Max load: 52 kg /114.6 pounds
CALL box of 20(10pair)
BL32580464 304 Stainless Steel Hidden Hinges(S)
Made of high quality 304 stainless steel. Length:54 mm/ 2.13 inch The length between holes center: 40 mm / 1.58 inch Height:19 mm / 2.13 inch Range: 180 Degrees Door thickness: ≥ 32 mm/ 1.26 inch Max load: 12 kg / 26.5pound
CALL box of 20(10pair)
BL11587001 304 Stainless Steel Propeller Wrench
Made of 304 Stainless Steel. Lock for tab washers fit for 1.09" hex prop nuts and 0.56" quadrilateral nuts. Overall Length: 10 inch /25.25 cm.
CALL box of 10
BL29580653 304 Stainless-Steel Bimini Boat Top PAD EYE, Eye Strap-size: M
Bimini Boat Top PAD EYE, Eye Straps, Tie Down, Kayak Deck Loops, Tie Down Anchor Point, footman's loop. Made of 304 grade stainless steel. Overall Length: 60 mm / 2.36inch Length between holes center: 47 mm / 1.85 inch; Height:22 mm / 0.87 inch; Weight: 0.013 kg / 0.46 oz.
CALL box of 10
BL29580553 304 Stainless-Steel Bimini Boat Top PAD EYE, Eye Strap-size: S
Bimini Boat Top PAD EYE, Eye Straps, Tie Down, Kayak Deck Loops, Tie Down Anchor Point, footman's loop. Made of 304 grade stainless steel. Overall Length: 53 mm / 2.09 inch; Length between holes center: 42 mm / 1.65 inch; Height:17 mm / 0.67 inch; Weight: 0.008 kg / 0.28 oz.
CALL box of 10
BL74541566 316 Stainless Steel Covered Strap Hinge with Cover Caps 3"×2.7"
Made of Polished finish 316 marine grade stainless steel Length: 75 mm / 2.95 inch Width: 70 mm / 2.76 inch Thickness: 2 mm / 0.08 inch Screw holes diameter: 7.3 mm/ 0.28 inch
CALL box of 20(10pair)
BL74541543 316 Stainless Steel D-Shaped Covered Strap Hinge with Cover Caps
Made of polished finish 316 grade stainless steel. Length: 2.9 inch / 74 mm Width: 1.5 inch / 38 mm Length between holes center: 1.56 inch / 39.5 mm Width between holes center: 0.78 inch / 19.8 mm Height :0.35 inch / 8.9 mm Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL74541572 316 Stainless Steel Round Profile Covered Strap Hinge with Cover
Made of polished finish 316 marine grade stainless steel. Thickness: 2 mm / 0.08 inch Screw holes diameter: 7.2 mm/ 0.28 inch
CALL box of 20(10pair)
BL43510205 316 Stainless Steel 1" Round Jaw Slide for Bimini Boat Top
*Bimini Boat Top Accessories: Jaw Slide. *Made of polished finish 316-grade stainless steel *Tube Size: 1". *Bolt Size: 1/4".
CALL box of 10
BL74510213 316 Stainless Steel 180-degree Hatch Strap Hinge 2.76" x 1.63"
Made of Polished finish 316-grade stainless steel. Overall Length:70 mm / 2.76 inch Overall Width: 41.3mm / 1.63 inch Thickness: 2 mm / 0.08 inch Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL31529061 316 Stainless Steel 90 Degree Door Stop L: 3.5", Base: 2"
*Made of Casting 316 Stainless Steel. *Length: 3.5", Base: 2",
CALL box of 10
BL43510214 316 Stainless Steel Base Deck Hinge 80 Degree Angle
316 Stainless Steel Base Deck Hinge for Bimini Top/ Canopy Deck- 80 Degree Angle. Made of Polished finish 316-grade stainless steel. Base Size: 3/4" × 2-1/4", Bolt Size: 1/4", Weight: 0.23 lb.
CALL box of 10
BL32550955 316 Stainless Steel Cabin Hook and Eye Latch/Catch 3"
Made of high-quality Polished finish 316-grade stainless steel, Small Hook Shaft Length: 3 inch / 75 mm.
CALL box of 10
BL32551055 316 Stainless Steel Cabin Hook and Eye Latch/Catch 4"
Made of high-quality Polished finish 316-grade stainless steel. Large Hook Shaft Length: 4 inch/ 100 mm.
CALL box of 10
BL32521051 316 Stainless Steel Carabiner Spring Snap Hook Boat (A: 4")
Made of Polished finish 316-grade stainless steel. SIZE Length: 100 mm / 4 inch, Width: 34 mm / 1-3/8 inch, Diameter: 10 mm / 2/5 inch, Weight: 130 g / 4.6 oz. We sell 4 sizes.
CALL box of 10
BL32520851 316 Stainless Steel Carabiner Spring Snap Hook Boat (B: 3")
*Made of Polished finish 316-grade stainless steel. SIZE (show as picture) Length: 78 mm / 3inch, Width: 34mm / 1-1/4inch, Diameter: 8mm / 3/8inch, Weight: 85g / 3 oz. We sell 4 sizes.
CALL box of 10
BL32520651 316 Stainless Steel Carabiner Spring Snap Hook Boat (C:2-3/8")
*Made of Polished finish 316-grade stainless steel. SIZE Length: 60 mm / 2-3/8 inch, Width: 18 mm / 3/4inch, Diameter: 6 mm / 1/4inch, Weight: 30 g / 1.1 oz. We sell 4 sizes.
CALL box of 10
BL32520551 316 Stainless Steel Carabiner Spring Snap Hook Boat (D: 2")
Made of Polished finish 316-grade stainless steel. SIZE Length: 50 mm / 2 inch, Width: 16 mm / 5/8 inch, Diameter: 5 mm / 1/5 inch, Weight: 17 g / 0.6 oz. We sell 4 sizes.
CALL box of 10
BL43520115 316 Stainless Steel Concave Base Deck Hinge with Removable Pin
*Made of polished finish 316-grade stainless steel. *Base Size: 3/4? × 2-1/4?, Pin Size: 1/4?. *Include Concave Base Deck Hinge, Removable Pin (as the pictures)
CALL box of 10
BL74541519 316 Stainless Steel Covered Strap Hinge with Cover Caps2.9" ×1.5"
*Made of Polished finish 316 marine grade stainless steel. Length: 74 mm / 2.9 inch Width: 38.5 mm / 1.5 inch Thickness: 2 mm / 0.08 inch Screw holes diameter: 5.4mm / 0.2 inch
CALL box of 20(10pair)
BL32510257 316 Stainless Steel Deck Hatch Latch Door Catch with Twist Action
Made of Polished finish 316-grade stainless steel.Diameter: 58 mm / 2.3 inch,Thickness:4.6 mm/ 0.18 inch, Screw holes diameter:4.3 mm/ 0.17 inch.
CALL box of 10
BL31510261 316 Stainless Steel Door Stop & Catch Set- L: 2.5", Base: 2"
*Made of Casting 316 Stainless Steel. *Holds door securely against rubber stop, reducing rattles. *Self-latching door catch to hold door in open position. *Rubber bumper helps minimize slam and vibration noise. *Please Note: Length: 2.5", Base: 2".
CALL box of 10
BL30583269 316 Stainless Steel Fishing Rod Holder with Drain ,30 Degree
Heavy Duty 316 Stainless Steel Deluxe Rod Holders/Flush Mount Fishing Rod Pole Holder, with Drain -30 Degree. Size: Length: 9", Liner I.D.: 1-5/8".
CALL box of 10
BL17550783 316 stainless steel Hatch Support and Adjuster 10" to 18" (Large)
Made of Polished finish 316-grade stainless steel. Width: 0.59" (15 mm), stretched from 10" to 18".
CALL box of 10
BL17550781 316 Stainless Steel Hatch Support and Adjuster 6" to 11" (Small)
Made of Polished finish 316-grade stainless steel. Width 0.59" (15 mm), stretched from 6" to 11".
CALL box of 10
BL17550782 316 Stainless Steel Hatch Support and Adjuster 8" to 14"(Medium)
*Width 0.59? (15mm), Stretched from 8" to 14". *Made of Polished finish 316-grade stainless steel. Suitable for both indoor and outdoor use, ideal for harsh environments such as yachts and boats.
CALL box of 10
BL12551009 316 Stainless Steel Heavy-duty Barrel Bolt Door Latches(L)
*Made of Polished finish 316-grade stainless steel, Suitable for both indoor and outdoor use, ideal for harsh environments such as yachts and boats. *Ideal for windows, doors, hatches, cupboards, cabinets etc. *Overall Length: 5-1/4", Width: 1-1/2", Bolt Length: 5".
CALL box of 10
BL74541520 316 Stainless Steel Hinge with Cover Caps 1.44"×1.41"
Made of polished finish 316 marine grade stainless steel. Length: 36.5 mm / 1.44 inch Width: 35.7 mm / 1.41 inch Thickness: 2 mm / 0.08 inch Length between holes center: 23 mm / 0.91 inch Width between holes center: 25.4 mm / 1 inch Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL43510207 316 Stainless Steel Jaw Slide for Bimini Top 7/8" Round Tube
*Bimini Boat Top Accessories: Jaw Slide. *Made of polished finish 316-grade stainless steel *Tube Size: 7/8". *Bolt Size: 1/4".
CALL box of 10
BL43510207 316 Stainless Steel Jaw Slide for Bimini Top 7/8" Round Tube
*Bimini Boat Top Accessories: Jaw Slide. *Made of polished finish 316-grade stainless steel. *Tube Size: 7/8". *Bolt Size: 1/4".
CALL box of 10
BL22585433 316 Stainless Steel Quick Release Pin w/ Drop Cam & Spring
316 Stainless Steel Quick Release Pin w/ Drop Cam & Spring 1/4" x 1" Grip Lanyard Prevents Loss Bimini Top
CALL box of 10
BL22585333 316 Stainless Steel Quick Release Pins w/ Drop Cam & Spring
Marine 316 Stainless Steel Quick Release Pins w/ Drop Cam & Spring 1/4" x 1" Grip for Boat Bimini Top Deck Hinge
CALL box of 10
BL32510241 316 Stainless Steel Round Flush Boat hatch Lift Pull Handle
316 Stainless Steel Round Flush Boat hatch Lift Ring/Deck Hatch Pull Handle- 3 Point Fixing SIZE Diameter: 52 mm / 2 inch Screw holes diameter:5 mm/ 0.2 inch
CALL box of 10
BL74541522 316 Stainless Steel Short Sided Strap Hinge with Cover Caps
316 Stainless Steel 5 Point Fixing Short Sided Strap Hinge with Cover Caps(SIZE:2.23" × 1.44") Made of polished finish 316 marine grade stainless steel. Length: 56.7 mm / 2.23 inch Width:36.5 mm / 1.44 inch Thickness: 2 mm / 0.08 inch Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL32550960 316 Stainless Steel Small Ring Pull Lift Handle with Rectangular
Made of 316 marine grade stainless steel. Length: 1.88 inch / 48 mm Weight: 1.52 inch / 39 mm
CALL box of 10
BL32521152 316 Stainless Steel Snap Hook with Double End Trigger Bolts (L)
Made of Polished finish 316-grade stainless steel. Designed for High load-bearing and Sturdy don't rust. Large overall length:4"
CALL box of 10
BL32510253 316 Stainless Steel Spring Folding Loaded Hat/ Coat Hook
(Closed)Length: 51 mm / 2 inch (Open)Hook protrudes Length:53 mm / 2.1 inch Height: 14 mm /0.6 inch Width: 29 mm / 1.1 inch Screw holes diameter:5 mm/ 0.2 inch The distance between holes center: 16.5 mm/ 0.7 inch
CALL box of 10
BL11510247 316 Stainless-Steel 1/2" Shank Angle Side Mount Rowlock Socket
*Made of polished finish 316-grade stainless steel. *Ideal for 1/2-inch diameter shank oarlock. *Please Note: Require 4 x #10 F/H Screws to install each socket. We don?t supply with screws.
CALL box of 20(10pair)
BL11510248 316 Stainless-Steel 1/2" Shank Side Mount Oarlock Socket
*Made of polished finish 316-grade stainless steel. *Ideal for 1/2-inch diameter shank oarlock, Base Size: 3-1/2"×1". *Please Note: Require 4 x #10 F/H Screws to install each socket. We don?t supply with screws.
CALL box of 20(10pair)
BL11510246 316 Stainless-Steel 1/2" Shank Top Mount Rowlock/Oarlock Socket
*Made of polished finish 316-grade stainless steel. *Ideal for 1/2-inch diameter shank oarlock. *Require 2 x #10 F/H Screws to install each socket.
CALL box of 20(10pair)
BL73585119 316 Stainless-Steel 13-1/2" Sport Steering Wheel with Knob for Bo
*Made of Polished finish 316-grade stainless steel. *Perfect for sailing, boating, and many other marines and rough weather applications. *Size: 13-1/2", Shaft: 3/4", Rim Size: 1". *This item includes Steering Wheel and Knob, please check the measurement chart carefully before you buy the item.
CALL box of 10
BL95510200 316 Stainless-Steel 15 Degree Dish 9 Spokes 13-1/2"Steering Wheel
*Made of polished finish 316-grade stainless steel. *Size: 13-1/2", Diameter x 3-3/8" Height, 15 Degree Dish, 3/4" shaft with (1) notch tapered keyway.
CALL box of 10
BL30581769 316 Stainless-Steel 15° Mount Fishing Rod Pole Holders with Drain
Heavy Duty 316 Stainless-Steel Deluxe Flush Mount Fishing Rod Pole Holders with Drain 15 Degree. *Made of heavy duty polished finish 316-grade stainless steel.Length: 9?, Liner I.D.: 1-5/8?.
CALL box of 10
BL30583269 316 Stainless-Steel 30°Mount Fishing Rod Pole Holder with Drain
Heavy Duty 316 Stainless Steel Deluxe Rod Holders/Flush Mount Fishing Rod Pole Holders , with Drain ,30 Degree Made of heavy duty polished finish 316-grade stainless steel.Length: 9", Liner I.D.: 1-5/8".
CALL box of 10
BL43510204 316 Stainless-Steel 7/8" Round Outside Eye End for Bimini Top
*Tube Size: 7/8". *Made of polished finish 316-grade stainless steel. *Fit most standard Bimini tops.
CALL box of 10
BL43510203 316 Stainless-Steel 7/8? Round Inside Eye End for Bimini Top
*Tube Size: 7/8". *Made of polished finish 316-grade stainless steel. *Fit most standard Bimini tops.
CALL box of 10
BL43510220 316 Stainless-Steel 90° Deck Hinge with Bolt for Bimini Top Boat
*Made of polished finish 316-grade stainless steel. *Base Size: 3/4" ×2-1/4", Bolt Size: 1/4", Weight: 0.24 lb.
CALL box of 10
BL43510218 316 Stainless-Steel Bimini Top Deck Hinge with Removable Pin
Made of Polished finish 316-grade stainless steel. Base Size: 3/4" × 2-1/4", Pin Size: 1/4".
CALL box of 10
BL32551060 316 Stainless-Steel Boat Locker Lift Pull Ring Handle 1.75" ×2.5"
Made of Polished finish 316 marine grade stainless steel. Measurements: 1.75-inch x 2.5 inch /44 mm × 63 mm
CALL box of 10
BL32550956 316 Stainless-Steel Cabin Hook and Eye Latch/Catch 3"
Made of high-quality Polished finish 316-grade stainless steel. We sell 2 different sizes, Large Hook Shaft Length: 3-1/2", Small Hook Shaft Length: 3"
CALL box of 10
BL32551056 316 Stainless-Steel Cabin Hook and Eye Latch/Catch 3-1/2"
Made of high-quality Polished finish 316-grade stainless steel, We sell 2 different sizes, Large Hook Shaft Length: 3-1/2", Small Hook Shaft Length: 3",
CALL box of 10
BL32550956 316 Stainless-Steel Cabin Hook and Eye Latch/Catch 4"
Made of high-quality Polished finish 316-grade stainless steel. We sell 2 different sizes, Large Hook Shaft Length: 5",Small Hook Shaft Length: 4".
CALL box of 10
BL31520594 316 Stainless-Steel Carabiner Snap Hook
*Made of polished finish 316-grade stainless steel. *Perfect for sailing, boating, and many other marines and rough weather applications. *We sell 4 different sizes.
CALL box of 10
BL31520994 316 Stainless-Steel Carabiner Snap Hook (E: 3-1/2")
*Made of polished finish 316-grade stainless steel. *SIZE: Length: 89.45mm/ 3-1/2inch, Width: 44.5mm / 1-3/4 inch. *Perfect for sailing, boating, and many other marines and rough weather applications.
CALL box of 10
BL31700594 316 Stainless-Steel Carabiner Snap Hook with Ring
*Made of polished finish 316-grade stainless steel. *Perfect for sailing, boating, and many other marines and rough weather applications. *We sell 4 different sizes.
CALL box of 10
BL31700994 316 Stainless-Steel Carabiner Snap Hook with Ring (E: 3-1/2")
*Made of polished finish 316-grade stainless steel. *Perfect for sailing, boating, and many other marines and rough weather applications. *SIZE: Length: 89.45 mm/ 3-1/2 inch, Width: 44.5 mm / 1-3/4 inch.
CALL box of 10
BL74541533 316 Stainless-Steel Covered Strap Hinge with Cover Caps3.0" ×1.5"
Made of polished finish 316 marine grade stainless steel. Length: 76 mm / 3.0 inch Width: 36.5 mm / 1.5 inch Thickness: 2 mm / 0.08 inch Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL74510120 316 Stainless-Steel Door Strap Hinge 1-1/2" x 1-1/2"
Made of Polished finish 316-grade stainless steel. Overall Length:37 mm / 1.5 inch Overall Width: 35.7 mm / 1.4 inch Thickness: 2 mm / 0.08 inch Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL30581769 316 Stainless-Steel Fishing Rod Pole Holders with Drain-15 Degree
Heavy Duty 316 Stainless-Steel Deluxe Flush Mount Fishing Rod Pole Holders with Drain-15 Degree. Size: Length: 9 inch, Liner I.D.: 1-5/8 inch.
CALL box of 10
BL30550424 316 Stainless-Steel Hatch Hinge with Removable Pin
316 Stainless-Steel Hatch Hinge with Removable Pin L: 2-5/8", W: 2-7/8"
CALL box of 10
BL12550909 316 Stainless-Steel Heavy-duty Barrel Bolt Door Latches/Lock
Marine Boat Stainless Steel Heavy-duty Barrel Bolt Door Latches/Lock 6 Point Fixing (size: 3-1/2 inch × 1-1/2 inch)
CALL box of 10
BL43510201 316 Stainless-Steel Inside Eye End for Bimini Top 1" Round Tube
*Tube Size: 1". *Made of polished finish 316-grade stainless steel. *Fit most standard Bimini tops.
CALL box of 10
BL32510254 316 Stainless-Steel Locker Hatch Anti-Rattle Latch Fastener Clamp
Made of Polished finish marine 316-grade stainless steel
CALL box of 10
BL04530142 316 Stainless-Steel Magnetic Ball Door Stopper Holder Set
*Made of Polished finish 316-grade stainless steel. *Magnetic ball door stopper holder set allow for an easy adjustment for any mating angle. Strong magnet ball holds about 4 kg.
CALL box of 10
BL43510202 316 Stainless-Steel Outside Eye End for Bimini Top 1" Round Tube
*Tube Size: 1". *Made of polished finish 316-grade stainless steel. *Fit most standard Bimini tops.
CALL box of 10
BL12510241 316 Stainless-Steel Oval Drain Plug-Fits 1' Hole Thread for 3/4"
*Made of Polished finish 316-grade stainless steel *Length :2.1" (54 mm), Hole Size:1" (24 mm), Thread Size:3/4" (20 mm). We don?t supply with screws.
CALL box of 10
BL31510205 316 Stainless-Steel Ring Pull with Spring Loaded Lift Handle
Size: Diameter: 51.5mm/ 2 inch High:18 mm/ 0.7 inch The distance between screw holes center: 1-5/16 inch Screw holes diameter:4.5 mm/ 0.18 inch
CALL box of 10
BL32529052 316 Stainless-Steel Snap Hook with Double End Trigger Bolts (S)
Made of Polished finish 316-grade stainless steel. Designed for High load-bearing and Sturdy don't rust. Overall length:3-1/2 inch.
CALL box of 10
BL32525050 316 Stainless-Steel Spring Snap Hook 2"
Made of 316 marine grade stainless steel with a high polish finish. Length:50 mm / 1.97 inch; Width:24 mm / 0.95 inch; Enter:12 mm / 0.47 inch; Weight:21 g / 0.74 oz.
CALL box of 10
BL32527050 316 Stainless-Steel Spring Snap Hook 2-1/2"
Made of 316 marine grade stainless steel with a high polish finish. Length:70 mm / 2-1/2 inch; Width:30 mm / 1.2 inch; Enter:14 mm / 0.6 inch; Weight: 53 g / 1.87 oz.
CALL box of 10
BL32521150 316 Stainless-Steel Spring Snap Hook 3-1/2"
Made of 316 marine grade stainless steel with a high polish finish. Length:93 mm / 3.66 inch; Width:45 mm / 1.77 inch; Enter:22 mm / 0.87 inch; Weight:130 g / 4.59 oz.
CALL box of 10
BL30310199 316 Stainless-Steel Swivel Head Halogen Cabin/Reading/Chart Light
Made of polished finish 316-grade stainless steel. 12V DC 10W MR3 LED bulb.
CALL box of 10
BL30510263 316 Stainless-Steel Welded-Plate U-Bolt with Special A
*Made of Bright polished exterior finish 316 grade stainless steel. *Stock Diameter: 0.464", Thread Length: 2.2", Overall Length: 4.85", Distance between center and center: 1.81?. *Has a welded base plate to minimize possible corrosion and provide excellent sealing.
CALL box of 10
BL04510262 316-Grade Stainless Steel Clamp-locking Cam Latches
Made of Polished finish 316-grade stainless steel. screw holes diameter: 0.17" (4.2 mm).
CALL box of 10
BL31270291 3D Wooden Art Human Figure -13 inch
*Made of seasoned hardwood, with fully articulated joints to allow for any pose, it mounted on a metal pole with a wood base. *Overall Height: 13-1/4-inch, Human Height: 12-1/4 inch.
CALL box of 10
BL13510261 4" Round 316 Stainless-Steel Inspection Deck Plate for Boat
*Made of Investment Cast 316 Stainless Steel. *Flange: 5-9/16", Plate Inside Diameter: 4".
CALL box of 10
BL73280220 5/8"-18 Thread Stainless Steel Steering Wheel Mounting Nut
*Made of Polished finish 316-grade stainless steel. *Ideal for Boat steering wheel, Yacht steering wheel. *Thread Size: 5/8"-18.
CALL box of 10
BL02610034 90 Degree Black Plastic Flush Mount Fishing Rod Holder
Made of Injection Molded PP. Size: Length 8", Inside Diameter:1-1/2", Install in 2" hole, mounting holes distance: 2-3/4".
CALL box of 10
BL31585928 90 Degree Fuel Tank Vent Round Head for 5/8" Hose
*Made of Stamped 304-grade stainless steel. *For use with 5/8" inside diameter hose. *Removable outer cap for cleaning and maintenance or for pressure testing. *Ideal for marine, caravan, truck, automotive applications and a wide variety of uses.
CALL box of 10
BL02615834 90 Degree White Plastic Flush Mount Fishing Rod Holder
*Made of Injection Molded Polypropylene. *Size: Length 8", Inside Diameter:1-1/2", Install in 2" hole, mounting holes distance: 2-3/4".
CALL box of 10
BL32110279 Aluminum Alloy 8-Shape Carabiner/ Buckle Snap Clip Hook
*The double-clip design easily connects two things together. *Made of Polished Finish Aluminum alloy, it is anti-oxidation, waterproof, wear-resistant, hard and light. *Length: 2-1/2 inch /63mm, Width: 1-5/16inch /33mm, Max load weight: 15kg.
CALL box of 10
BL32120658 Aluminum Angle Mount Wake Board Tower Rack Fit 1-1/2" to 2" Rail
*Made of anodized finish aluminum, soft rubber inserts for secure tight board protection secures 2 boards.
CALL box of 10
BL32120646 Aluminum Flared Weld-On Rod Holder with Flared White Vinyl Insert
Made of Aluminum alloy, Includes form-fitted PVC anti-fungal white liner.
CALL box of 10
BL93113890 Aluminum Flared Weld-On Rod Holder with Flared White Vinyl Insert
10.1" L with flared design for easy rod placement,1-3/4" Inner diameter white liner (top), Flared style with 3/8" Coped Blade. Please check the measurement chart carefully before you buy the item.
CALL box of 10
BL93120689 Aluminum Flared Weld-On Rod Holder with Flared White Vinyl Insert
*Made of Aluminum alloy, Ideal for marine and rough weather applications. *Perfect for welding to towers, T-tops, radar arches, railings, leaning posts and a wide variety of uses. *Includes form-fitted PVC anti-fungal white liner. *Weld I-Beam securely seats rod butt, Solid Construction.
CALL box of 5
BL32240216 American/ US Flag, SIZE: 12" X 18"
Length: 21 inch, Width: 12.5 inch. The length between holes center: 11 inch.
CALL box of 10
BL72270210 Bilge Blower 12-Volt 3-inch Diameter Hose
Made of Injection Molded ABS. Five-blade fan maximize airflow and efficiency; low amp draws Motor for longer blower and battery life. Hose Diameter:3", Current: 12V DC, Length: 5", Fuse: 2.7 A.
CALL box of 10
BL12615665 Bimini Top Boat Black Round Nylon Jaw Slide-3/4" Tube
Bimini Boat Top Accessories: Jaw Slide. Made of nylon. Tube Size: 3/4". Bolt Size: 1/4".
CALL box of 10
BL12615662 Black Nylon Bimini Top Deck Hinges
Base Width: 13/16 inch /20.6 mm Base Length: 2-1/2 inch / 63.5 mm Bolt Size: 1/4 inch / 6.35 mm
CALL box of 10
BL73220521 Black Nylon Boat Hook Clip for 1" Tube
*Made of Nylon, Suitable for both indoor and outdoor use. *Non-conductive, non-magnetic and non-corrosive *Suit for 1" diameter tube, such as storing boat hooks, mops, flashlights, pumps tools etc.
CALL box of 20(10pair)
BL29220534 Black Nylon Boat Hook Holder Clip (tube:1-1/2 inch)
Holds poles up to 1-1/2" diameter, Base dimension: 2.4inch L x 0.6inch W (61 mm x 15 mm), Screw holes diameter: 0.2 inch (5.5mm)
CALL box of 10
BL12615661 Black Nylon Inside Eye End for 7/8" Tube
*Made of Nylon. *Bimini Pole End Piece. *Tube Size: 7/8?.
CALL box of 10
BL96561282 Black Pattern Stainless-Steel Drink Holder with Center
*Made of polished finish 304-grade stainless steel. *Size: Top Diameter: 4-1/4 inch / 108mm, Bottom Diameter: 2-7/8 inch / 72mm, Depth: 3-1/4inch / 82 mm
CALL box of 10
BL74615606 Black PC Boat Steering Wheel Center Cap
*Made of Polycarbonate *For use with destroyer style steering wheels *Face diameter: 2-5/8"; Insert diameter: 2-1/2"; Insert depth: 3/8";
CALL box of 10
BL99610031 Black Plastic 2-3/8"to 3-7/8" Adjustable Arms Folding Cup Holder
*Made of Acrylonitrile Butadiene Styrene plastic, specifically designed for marine applications. *Closed Size: Length: 3-3/4", Height: 1-1/8", Width: 3-7/8", the arms diameter adjusts from 2-3/8"to 3-7/8". We have 2 colors (black and white).
CALL box of 10
BL31610173 Black Plastic Cup Drink Holder with Side-Drain Hole
Made of Molded inject plastic. Size: Top Diameter: 11 cm/ 4-1/4", Bottom Diameter: 7 cm/ 2-3/4", Depth: 8 cm/ 3-1/8", Drain Hole Diameter: 6 mm / 1/4".
CALL box of 10
BL31615573 Black Plastic Cup Drink Holder without Drain Hole
Made of Molded inject plastic. No drain holes in the bottom to keep moisture away from electronics or other items below. No Mounting Screws Required Smooth Finish for Easy Cleaning Up. Size: Top Diameter: 11 cm/ 4-1/4", Bottom Diameter: 7 cm/ 2-3/4", Depth: 8 cm/ 3-1/8"
CALL box of 10
BL31610073 Black Plastic Drink Holder with Center Drain Hole
*Made of Molded inject plastic. *Size: Top Diameter: 11 cm/4.3", Bottom Diameter: 7 cm/ 2.8", Depth: 8 cm/3.1", Drain Hole Diameter: 8 mm / 3/8".
CALL box of 10
BL20510143 Blue 12? Bungee Cord with Stainless-Steel Hook
*Hook is made of 304-grade stainless steel. *Bungee Cord Diameter: 5/16inch /8mm, Bungee Cord Length: 12inch /300mm.
CALL box of 10
BL20510142 Blue 20" Bungee Cord with Stainless-Steel Hook
*Hook is made of 304-grade stainless steel. *Bungee Cord Diameter: 5/16inch /8mm, Bungee Cord Length: 20inch /500mm. *Ideal for backpacking, camping, boating and fishing and a wide variety of uses.
CALL box of 10
BL20510140 Blue 40" Bungee Cord with Stainless-Steel Hook-3/8" Stock
*Hook is made of 304-grade stainless steel. *Polyester weave jacket protects against abrasions; sun and weather resistant, non-mildewing. *Bungee Cord Diameter: 5/16inch /8mm, Bungee Cord Length: 40inch /1000mm, Hooks Length: 2-1/2".
CALL box of 10
BL24510101 Boat Anchor Dock Line Stainless-Steel Mooring Spring 10-3/4"
*Made of 304-grade stainless steel. *Perfect for sailing, boating, and many other marines and rough weather applications. *Diameter: 3/16 inch / 5.0 mm, Length: 10-3/4 inch / 270 mm. *We sell 3 different sizes, please check the measurement chart carefully before you buy the item.
CALL box of 10
BL24510103 Boat Anchor Dock Line Stainless-Steel Mooring Spring 14-3/4"
*Made of 304-grade stainless steel. *Diameter: 1/4 inch / 6 mm, Length: 14-3/4 inch. *Perfect for sailing, boating, and many other marines and rough weather applications.
CALL box of 10
BL12615666 Boat Bimini Top Black Round Nylon Inside Eye End-3/4 inch Tube
Marine Boat Bimini Top Black Round Nylon Inside Eye End-3/4 inch Tube
CALL box of 10
BL29576531 Boat Tapered Conical Thru-hull soft Wood Plugs-Set of 9, 3 sizes
A set of 3 different sizes ,9 pcs.
CALL box of 10
BL30120315 Boat Universal Speedometer Kick-up Pilot / Pilot Tube 80 MPH
Includes mounting parts.
CALL box of 10
BL30615815 Boat Universal Speedometer Kick-up Pilot / Pilot Tube 80 MPH
Boat Universal Speedometer Kick-up Pilot / Pilot Tube 80 MPH
CALL box of 10
BL29230386 Brass LED Chart Light-Large Head MR-16-3W Light
Made of Brass.Base:46.6 mm ×53.8 mm, LED: MR-16-3W.
CALL box of 10
BL29230168 Brass Snap Handle Drain Plug (Size:1")
*Made of Brass *Diameter:1 inch / 25 mm
CALL box of 10
BL29230169 Brass Snap Handle Drain Plug (Size:1-1/4")
Made of Brass,Diameter:1.25 inch / 32 mm
CALL box of 10
BL29230486 Brass Swivel Head Cabin/Reading/Chart LED Light
Made of Brass. This light is multi-directional, adjustable in any direction. The head swivels and turns in any direction and stays in position. A convenient on and off switch is located on the base of the light.
CALL box of 10
BL29230170 Brass T-Handle 1" Drain Plug
*Made of Brass *Diameter:1 inch / 25 mm *We have 2 sizes,other one is 1-1/4" Drain Plug.
CALL box of 10
BL29230171 Brass T-Handle 1-1/4? Drain Plug
*Made of Brass. *Diameter:1-1/4 inch / 32 mm. *We have 2 sizes, the other one is 1", please check the measurement chart carefully before you buy the item.
CALL box of 10
BL30510119 Double Spring Ball Boat Door Stud Catch (7/16" × 1-15/16")
*Made of polished finish 304-grade stainless steel. *Base Size: 7/16"× 1-15/16", Height: 1/2".
CALL box of 10
BL30510279 Heavy Duty 316 Stainless-Steel Hatches Door Strap Hinge
BLUE WHALE Heavy Duty 316 Marine Stainless Steel 6 Fixing Points Hatches Door Strap Hinge (SIZE: 1.5" ×3")
CALL box of 20(10pair)
BL32550937 Heavy Duty Marine 316 Stainless-steel Folding Step
Made of polished finish 316-grade stainless steel.
CALL box of 10
BL85570185 Horizontal Stanchion Rail Mount Anchor Bracket / Holder
Mounts securely to any 7/8" to 1" horizontal stanchion. Anchors up to 35 lbs. are held away from rail, grips anchor securely to any horizontal rail
CALL box of 10
BL85570085 Horizontal Stanchion Rail Mount Anchor Bracket / Holder-Max1-1/4"
*Mounts securely to max 1-1/4" horizontal stanchion *Anchors up to 35 lbs. are held away from rail, grips anchor securely to any horizontal rail
CALL box of 10
BL31610358 Jet Boarding Ladder Latch Band/ Yacht Sports Rubber Strap-3 holes
Made of Black Silica Gel Rubber. This ladder/band use on most newer ladder models on boats, such as Yamaha AR, SX, LX and SR jet/sports boat.
CALL box of 10
BL31610458 Jet Boarding Ladder Latch Band/ Yacht Sports Rubber Strap-4 holes
Made of Black Silica Gel Rubber. This ladder/band use on most newer ladder models on boats, such as Yamaha AR, SX, LX and SR jet/sports boat.
CALL box of 10
BL99310458 LED Blue Stainless Steel Cup Drink Holder with Drain
Made of high polished stainless steel for supreme corrosion resistance. Contain single 12 Volt highly Water Proof LED. Includes drain with hose barb, mounting gasket and internal pad. Height: 3-1/4", LED Color: Blue, Flange: 4-1/4", Barb: 3/8".
CALL box of 10
BL99310757 LED Light Ring Blue Stainless-Steel Cup Drink Holder with Drain
*Made of high polished stainless steel for supreme corrosion resistance. *Height: 3-1/4", LED Color: Blue, Flange: 4-1/4", Barb: 3/8".
CALL box of 10
BL29510187 Manual Handheld Air Horn /Fog Horn Loud Signal Whistle
Made of Polished finish 304-grade stainless steel Overall length 7" (180 mm) We gift 13" lanyard (as picture)
CALL box of 10
BL12615667 Marine Bimini Boat Tops Nylon Black Deck Hinge/ Angle 80 Degree
*Made of Nylon. *Base Width: 7/8". *Base Length: 2-1/2". *Bolt Size: 1/4".
CALL box of 10
BL12615663 Marine Bimini Top Boat Black Round Nylon Jaw Slide-7/8 inch Tube
Marine Bimini Top Boat Black Round Nylon Jaw Slide-7/8 inch Tube *Bimini Boat Top Accessories: Jaw Slide *Made of nylon *Tube Size: 7/8 inch *Bolt Size: 1/4 inch
CALL box of 10
BL99610627 Marine Black Nylon Boating Cleats & Chocks
*Made of High Impact Nylon, ideal for tying off an anchor or for temporary docking. *Overall length:5-7/8 inch/36.2 mm, center to center measurement of the holes distance: 1-7/16 inch / 148.6mm.
CALL box of 10
BL12615664 Marine Black Round Nylon Outside Eye End-7/8 inch Tube
Marine Black Round Nylon Outside Eye End-7/8" Tube *Made of Nylon *Tube Size: 7/8 inch *Fit most standard Bimini tops
CALL box of 10
BL20510141 Marine Blue Bungee Cord with Stainless-Steel Hook-32"
*Hook is made of 304-grade stainless steel. *Polyester weave jacket protects against abrasions; sun and weather resistant, non-mildewing. *Bungee Cord Diameter: 5/16 inch /8 mm, Bungee Cord Length: 32 inch /800 mm.
CALL box of 10
BL24510102 Marine Boat Anchor Dock Line Stainless-Steel Mooring Spring 13"
*Made of 304-grade stainless steel. *Diameter: 1/4inch / 6.0mm, Length: 13 inches. *Perfect for sailing, boating, and many other marines and rough weather applications.
CALL box of 10
BL29230163 Marine Boat Brass Drain Tube (SIZE: 3" x 1")
Made of Brass.Diameter: 25 mm/ 1 inch, Overall length: 76 mm / 3 inch.
CALL box of 10
BL29230162 Marine Boat Brass Drain Tube (SIZE: 3" x 1-1/4")
Made of Brass.Diameter: 32 mm/ 1-1/4 inch, Overall length: 76 mm / 3 inch.
CALL box of 10
BL77510125 Marine Boat Stainless Steel Midget Clam Shell Vent / Wire Cable C
*Made of Stamped 304 Stainless Steel. Perfect for sailing, boating, and many other marines and rough weather applications. *Width: 2-1/8", Length: 2-1/4", Height: 3/4", Fastener: #6
CALL box of 10
BL79510195 Marine Boat Stainless-Steel table bracket -Short Release Arm, 12"
*The supporting arm is 12" long, and height that fixed on the wall is 6-1/2", folding shelf support can be folded down and out of the way smoothly in your convenience. The max load is 330 LB/ 150 KG for sustaining large pressure *Made of Polished finish 304-grade stainless steel.
CALL box of 10
BL31230195 Marine Brass Drain Plug Fits 1" Dia. Hole, 1/2" NPT
*Made of brass. *Replaceable Plug is 1/2-inch NPT, requires #8 Fasteners, 2-inch mounting flange, protrusion is 1 inch diameter and 7/16 inch deep.
CALL box of 10
BL23510121 Marine Great Strong Diamond Pad Eye (2-3/8" ×1-1/2")
*Made of polished finish 304 grade stainless steel. *Perfect for sailing, boating, and many other marines and rough weather applications.
CALL box of 10
BL99311358 Marine LED Red Stainless-Steel Cup Drink Holder with Drain
*Made of high polished stainless steel for supreme corrosion resistance. *Height: 3-1/4", LED Color: Red, Flange: 4-1/4", Barb: 3/8".
CALL box of 10
BL13586150 Marine Round White Stainless-Steel Cowl Vent 3"
*Made of Stamped 304 Stainless Steel, the interior of the vents is powder-coated and painted with marine grade corrosion resistant paint in classic white. *Plate outside diameter: 3", Height: 9-3/8", Mouth Diameter: 6.3".
CALL box of 5
BL13586160 Marine Round White Stainless-Steel Cowl Vent 4"
*Plate outside diameter: 4", Height: 12", Mouth Diameter: 8-5/8". *Made of Stamped 304 Stainless Steel, the interior of the vents is powder-coated and painted with marine grade corrosion resistant paint in classic white.
CALL box of 5
BL79510152 Marine Stainless Steel 10 Hp Outboard Motor Bracket-2 Stroke
*Entirety is made of Marine Grade Stainless Steel, Base is made of plastic. *Motors up to 10 HP or max weight 82 lbs., Mounting Size 4-7/16" × 5-11/16", Broad Size: 8-1/4" × 10-3/8".
CALL box of 10
BL73561531 Marine Stainless Steel 3-Step Ladder with Slide Gudgeo
*Made of Marine grade Stainless Steel *Weight Capacity: 400 lbs., Step: 3, Length deployed: 35", Length Stowed: 14-1/2", Width: 10".
CALL box of 10
BL83588035 Marine Stainless Steel 3-Step Telescoping Swim Ladder
*Made of Marine grade Stainless Steel, include Rubber Strap. *Weight Capacity: 400 lbs., Step: 3, Length deployed: 27-1/2", Length Stowed: 13", Width: 11".
CALL box of 10
BL83588045 Marine Stainless Steel 4-Step Telescoping Swim Ladder
*Made of Marine grade Stainless Steel, include Rubber Strap. *Weight Capacity: 400 lbs., Step: 4, Length deployed: 36", Length Stowed: 14-3/8", Width: 11-3/4". *Folds out and over transom and telescopes easily into water and quickly stowed away while not in use.
CALL box of 10
BL77581030 Marine Stainless Steel Louvered Vent - 10 Slots
*Made of Polished 304-grade stainless steel. *Slots: 10, Length: 20-13/16", Width: 4-7/16", Height: 1-1/2". *Designed to allow a flush surface at the vent area reducing damage to the vent as well as mooring lines, fishing lines, etc.
CALL box of 5
BL77581029 Marine Stainless Steel Louvered Vent -10 Slots
*Made of Polished 304-grade stainless steel. *Slots: 10, Length: 20-3/4", Width: 3", Height: 1-1/4". *Designed to allow a flush surface at the vent area reducing damage to the vent as well as mooring lines, fishing lines, etc.
CALL box of 5
BL77580327 Marine Stainless Steel Louvered Vent for Boat - 3 Slots
*Made of polished finish 304-grade stainless steel. *Slots: 3, Length: 8-1/4", Width: 4-3/8", Height: 1-1/2".
CALL box of 5
BL77580629 Marine Stainless Steel Louvered Vent- 6 Slots
*Made of Polished finish 304-grade stainless steel. *Slots: 6, Length: 12-7/8?, Width: 3", Height: 1-1/4?. *Designed to allow a flush surface at the vent area reducing damage to the vent as well as mooring lines, fishing lines, etc.
CALL box of 5
BL78510152 Marine Stainless-Steel 1/2? Stock Bow Eye/ U-Bolt (L: 5-1/4")
*Made of Bright polished exterior finish 304 grade stainless steel. *Stock Diameter: 1/2", Thread Length: 3-1/2", Overall Length: 5-1/4", Center to Center Length: 1.81".
CALL box of 10
BL81588144 Marine Stainless-Steel 12V 3W LED dome light 4"
*Made of Stamped 304 Stainless Steel. *Light Diameter: 4", Base Diameter: 5-1/2", Height: 1-5/8", LED: 12V,3W
CALL box of 10
BL85580333 Marine Stainless-Steel 3-Step Flip-Up Telescoping Ladder for Boat
*Made of marine grade stainless steel, great for sailing, boating, and many other marines and rough weather applications. *Length Deployed: 33-5/8", Length Stowed: 17", Ladder Width: 13-1/2".
CALL box of 10
BL29510175 Marine Stainless-Steel 4" Center Knob Butterfly Vent
*Made of 304 Stainless Steel *Diameter: 100 mm (4"), Thickness: 1 mm (0.05")
CALL box of 10
BL20560154 Marine Stainless-Steel 9" Handrails/ Grab Rail Handle
*Made of Polished finish 304-grade stainless steel *Suitable for both indoor and outdoor use, ideal for harsh environments such as yachts and boats. *Overall Length: 9", Thread: 5/16", Oval Tube: 25.4 mm ×18.8 mm
CALL box of 10
BL29250275 Marine Stainless-Steel Center Knob Butterfly Vent 5"
*Made of 304 Stainless Steel. *Diameter: 130 mm (5 inch), Thickness:1.0 mm (0.05 inch).
CALL box of 10
BL12510180 Marine Stainless-Steel Door Stop Catch and Holder (L: 2-3/4")
*Made of polished finish 304-grade stainless steel. *Base Size: 1-9/16"×1-5/16", Height: 2-3/4". *Ideal for the door, cabinet doors, hatches and a wide variety of uses.
CALL box of 10
BL12510181 Marine Stainless-Steel Door Stop Catch and Holder (M: 1-5/8")
*Made of polished finish 304-grade stainless steel. *Base Size: 1-9/16" ×1-5/16", Height: 1-5/8". *Ideal for the door, cabinet doors, hatches and a wide variety of uses.
CALL box of 20(10pair)
BL12510182 Marine Stainless-Steel Door Stop Catch and Holder (S: 1-1/2")
*Made of polished finish 304-grade stainless steel. *Base Size: 1-1/16? ×1-1/8?, Height: 1-1/2?. *Ideal for the door, cabinet doors, hatches and a wide variety of uses.
CALL box of 10
BL30570917 Marine Stainless-Steel Double Fender Holder 9" Dia.
*Made of 304-grade Stainless Steel. *Size: 9-1/2" ×19", perfect to 9" diameter fender, Height: 14-11/16". *Constructed of solid stainless-steel rods, black stanchion clamps to attach fender holder to 7/8" to 1" rail.
CALL box of 10
BL99310557 Marine Stainless-Steel Drink Cup Holder with Drain -3 LED Red
*Made of high polished stainless steel for supreme corrosion resistance. *Height: 3-1/4", LED: 12V,1W, LED Color: Red, Flange: 4-1/4", Barb: 3/8".
CALL box of 10
BL77510139 Marine Stainless-Steel Flush Mount Rod Holder with Rubber Cap
*Made of Stamped 304 Stainless Steel & PVC Liner. *Length: 9-1/4", Inside Diameter: 2", Vertical Angle: 30 Degree, Screw holes diameter: 3/8". *Includes Rubber Cap, Tube Liner and Gasket, it is ideal for kayak, canoe, boat etc.
CALL box of 5
BL29510126 Marine Stainless-Steel Folding Pad Eye for Boat (2" ×2-1/4")
*Made of polished finish 304-grade stainless steel, ideal for sailing, boating, and many other marines and rough weather applications. *Height: 14.8mm/ 1/2inch, Width: 50.8 mm/ 2inch, Length: 57.1mm / 2-1/4inch, D-ring inner size: 1.1" x 1.5" (28 x 38mm).
CALL box of 10
BL95585515 Marine Stainless-Steel Hose Vent for 3? Dia. Hose
*Made of 304-grade Stainless Steel. *Hose Diameter: 3", Flange Size: 4" × 4", Height: 2-7/16", Fastener: #10 FH.
CALL box of 10
BL95576515 Marine Stainless-Steel Hose Vent for 4" Dia. Hose
*Made of 304-grade Stainless Steel. *Hose Diameter: 4", Flange Size: 5"× 5", Height: 3", Fastener: #10 FH.
CALL box of 10
BL77580829 Marine Stainless-Steel Louvered Vent - 8 Slots
*Made of Polished finish 304-grade stainless steel. *Slots: 8, Length: 16-13/16", Width: 3", Height: 1-1/4" *Designed to allow a flush surface at the vent area reducing damage to the vent as well as mooring lines, fishing lines, etc.
CALL box of 5
BL77580729 Marine Stainless-Steel Louvered Vent- 7 Slots
*Made of Polished finish 304-grade stainless steel. *Slots: 7, Length: 14-7/8", Width: 3", Height: 1-1/4". *Designed to allow a flush surface at the vent area reducing damage to the vent as well as mooring lines, fishing lines, etc.
CALL box of 5
BL20510150 Marine Stainless-Steel Oval Grab Rail with Flange and Stud 12"
*Made of polished finish 304-grade stainless steel. *Stud to stud Distance: 12 inch/ 304.8 mm. *Stud: 5/16" × 2". *Oval Tube: 25.4 mm × 18.8 mm.
CALL box of 10
BL20510151 Marine Stainless-Steel Oval Grab Rail with Flange and Stud 16"
*Made of polished finish 304-grade stainless steel. *Stud to stud Distance: 16 inch/ 406.8 mm. *Stud: 5/16" × 2". *Oval Tube: 25.4 mm × 18.8 mm.
CALL box of 10
BL20510154 Marine Stainless-Steel Oval Grab Rail with Flange and Stud 8-5/8"
*Made of polished finish 304-grade stainless steel. *Stud to stud Distance: 8-5/8 inch/ 219 mm. *Stud: 5/16" × 2". *Oval Tube: 25.4 mm×18.8 mm.
CALL box of 10
BL20580750 Marine Stainless-Steel Oval Seal Grab Rail Handle with Flange and
*Made of polished finish 304-grade stainless steel. *Stud to stud Distance: 7-7/8 inch/ 200 mm. *Stud: 5/16" × 1-3/4". *Oval Tube: 25.4 mm× 18.8 mm.
CALL box of 10
BL77510121 Marine Stainless-Steel Rectangle Stamped Louvered Vent
*Made of Stamped 304 Stainless Steel. *Width: 65 mm (2-1/2 inch), Length: 127.0 mm (5 inch), Thickness: 0.8 mm (0.03 inch).
CALL box of 10
BL77510122 Marine Stainless-Steel Rectangle Stamped Louvered Vent
*Made of Stamped 304 Stainless Steel. *Width: 115 mm (4-1/2 inch), Length: 127.0 mm (5 inch), Thickness: 0.8 mm (0.03 inch).
CALL box of 10
BL77510120 Marine Stainless-Steel Rectangle Stamped Louvered Vent (5" × 9")
*Made of Stamped 304 Stainless Steel. *Width: 127 mm(5 inch), Length: 228.0 mm(9 inch), Thickness: 0.8 mm(0.03 inch).
CALL box of 10
BL74510128 Marine Stainless-Steel Round Side Door Strap Hinge 5-5/8" ×1.5"
*Made of polished finish 304-grade stainless steel. *Ideal for the door, cabinet doors, hatches and a wide variety of uses. *Length:5-5/8inch /143 mm, Width: 1-1/2 inch /38.1 mm, Thickness: 2mm.
CALL box of 50
BL29510176 Marine Stainless-Steel Side Knob Butterfly Vent 4"
*Made of 304 Stainless Steel. *Diameter: 100(4"), Thickness: 1.0(0.05")
CALL box of 10
BL29250276 Marine Stainless-Steel Side Knob Butterfly Vent 5"
*Made of 304 Stainless Steel. *Diameter: 130(5"), Thickness: 1.0(0.05").
CALL box of 10
BL32616278 Newest Black Pattern Closable Drain Plastic Drink Cup Holder
Newest Black Pattern Close-able Drain Plastic Holder for ROCKY MOUNTAIN 30 oz. Insulated Tumbler/ Mug
CALL box of 100
BL32610078 Newest Black Plastic Drink Cup Holder with Close-able Drain
Newest Black Close-able Drain Plastic Holder for ROCKY MOUNTAIN 30 oz. Insulated Tumbler/ Mug
CALL box of 10
BL79587095 Newest Stainless-Steel Table Bracket -Long Release Arm,12" 330 LB
The supporting arm is 12" long, and height that fixed on the wall is 6-1/2", folding shelf support can be folded down and out of the way smoothly in your convenience. The max load is 330LB/ 150KG for sustaining large pressure
CALL box of 10
BL41600209 PE Black Ball Bungee Cord for 2-Step Telescoping Boat
*Made of polyethylene. *It can reusable for tightening the fixed ladder. *High tension securing bungee cord strap Resistant to abrasion, mildew, and UV Sunlight.
CALL box of 100
BL41600309 PE Black Ball Bungee Cord for 3-Step Telescoping Boat Ladders
*Made of polyethylene. *It can reusable for tightening the fixed ladder. *High tension securing bungee cord strap Resistant to abrasion, mildew, and UV Sunlight.
CALL box of 100
BL41600409 PE Black Ball Bungee Cord for 4-Step Telescoping Boat Ladders
*Made of polyethylene. *It can reusable for tightening the fixed ladder. *High tension securing bungee cord strap Resistant to abrasion, mildew, and UV Sunlight.
CALL box of 100
BL83610079 Removable 1" Hook Ladder Cup Mount Ladder / tube Insert Plugs
*Made of PP+5% GF. *Screw holes diameter:0.2 inch/5.1 mm, insert plugs diameter: 1 inch/ 28 mm.
CALL box of 20(10pair)
00812112033186 Replacement Roller 1.5"*2"
*Overall length: 2" *Mounting hole diameter: 5/8" *Made of Rigid PU, it is wear-resistant, chemical resistance, high-strength, high elasticity, low pressure, wear-resistant, shock-absorbing strong, tear-resistant, radiation-proof, high load and cushioning buffer and other good performance.
* 0.00 each
BL32610002 Round Black Nylon Marine Boat Hatch Flush Pull Slam Latch
Made of Reinforced Black Plastic. Size: Flange diameter:2-2/5" (61 mm), Installation Hole diameter 2" (50 mm)
CALL box of 10
BL31584584 Round Stainless-Steel Solar Power roof fan/ Ventilator
Solar Power Ventilator will help to reduce mold, mildew, moisture, and excessive heat build-up. It is low profile, projects only 36 mm above the caravan roof or boat deck, with 215 mm overall diameter.
CALL box of 10
BL32615802 Round White Nylon Marine Boat Hatch Flush Pull Slam Latch
Made of Reinforced White Plastic. Size: Flange diameter:2-2/5"(61 mm), Installation Hole diameter 2"(50 mm)
CALL box of 10
BL31510260 Silver 316 Stainless-Steel Single Fishing Rod Storage Rack
Made of Polished finish 316-grade stainless steel,Rod Butt is inserted into Closed End of the set. Vinyl insert protects the Rod Butt. Tip of the rod is placed into Locking End of the set and Nylon Locking Ring is rotated to lock it in.
CALL box of 10
BL28510166 Stainless Steel 3/8" Stock Fixed Welding Plate U-Bolt
Stainless Steel Marine Boat Stern 3/8" Stock Fixed Welding Plate Bow Eye Tie Down U Bolt(Overall Length 4.5 inch)
CALL box of 10
BL15587075 Stainless Steel 3/16" Pull Pin and Lanyard with Nylon Knob
Lanyard cable made of 304-grade stainless steel. Dia. 3/16?, Grip: 0.98?, Head material: Black Nylon. Quick release pull pin dia. 3/16" (4.76 mm).
CALL box of 10
BL74510133 Stainless Steel 6 Point Fixing Door Strap Hinge (3.0" ×1.5")
*Made of polished finish 304 marine grade stainless steel. Length: 76.2 mm / 3 inch Width: 37 mm / 1.5 inch Thickness: 2 mm / 0.08 inch
CALL box of 20(10pair)
BL20310175 Stainless Steel Grab Rail with 1 Blue LED Light (Length: 9")
Made of Polished finish 304-grade stainless steel, Unique LED design, lighting make your night life more convenient. Base Size: 2.2" × 1.3" (55.0 mm × 32.4 mm), Round Tube: 1" (25.4 mm), Length: 9". Size show as picture.
CALL box of 10
BL20310176 Stainless Steel Grab Rail with 2 Blue LED Lights (Length: 12")
*Made of Polished finish 304-grade stainless steel, Unique LED design, lighting make your night life more convenient *Base Size: 2.2" × 1.3" (55.0 mm × 32.4 mm), Round Tube: 1" (25.4 mm), Length: 12". Size show as picture.
CALL box of 10
BL20310177 Stainless Steel Grab Rail with 2 Blue LED Lights (Length: 16")
Made of Polished finish 304-grade stainless steel, Unique LED design, lighting make your night life more convenient Base Size: 2.2" × 1.3" (55.0 mm × 32.4 mm), Round Tube: 1" (25.4 mm), Length: 16". Size show as picture.
CALL box of 10
BL20310178 Stainless Steel Grab Rail with 3 Blue LED Lights (Length: 18")
Made of Polished finish 304-grade stainless steel, Unique LED design, lighting make your night life more convenient.Base Size: 2.2" × 1.3" (55.0 mm × 32.4 mm), Round Tube: 1" (25.4 mm), Length: 18".
CALL box of 10
BL29510114 Stainless Steel Hatch Spring Holder Lid Support Spring for Boat
Made of 304-grade stainless steel. Diameter: 7/16 inch (11 mm), Length: 8-1/4 inch (210 mm)
CALL box of 100
BL12550409 Stainless Steel Heavy-duty Barrel Bolt Door Latch (4-1/4"×1-1/2")
*Made of Polished finish 316-grade stainless steel, Suitable for both indoor and outdoor use, ideal for harsh environments such as yachts and boats. *Ideal for windows, doors, hatches, cupboards, cabinets etc. *Overall Length: 4-1/4", Width: 1-1/2", Bolt Length: 4".
CALL box of 10
BL77510124 Stainless Steel Midget Clam Shell Vent / Wire Cable Cover
*Made of Stamped 304 Stainless Steel. *Width: 1-5/8", Length: 1-3/4", Height: 1/2", Fastener: #6.
CALL box of 10
  BL12510142 Stainless Steel Oval Rope and Chain Deck Pipe (Up to ˝? to 1 ˝?)
*High quality 304 stainless steel cast to withstand the highest tolerance *Oval rope and chain pipe deck allows large rope/chain to pass through *Accommodating up to ˝? to 1 ˝? rope or chain, Base: 6.32? x 4.47?, Cover: 4.3? x 2.31?
CALL box of 10
BL29310632 Stainless Steel Splicing Fid Spike with Wood Handle (Large: 15")
*Made of 304-grade Stainless Steel, and Sanded Smooth Beechwood Handle. *Large size: Rope diameter to 1", Width: 1-3/4", Length: 15".
CALL box of 10
BL29250232 Stainless Steel Splicing Fid Spike with Wood Handle (Medium:11")
*Made of 304-grade Stainless Steel, and Sanded Smooth Beechwood Handle. *Rope diameter: 1/2"-1", Width: 1-1/4? (31 mm), Length: 11? (280 mm).
CALL box of 10
BL29510132 Stainless Steel Splicing Fid Spike with Wood Handle 6-11/16"
*Made of 304-grade Stainless Steel, and Sanded Smooth Beechwood Handle. *Rope diameter up to 1/2", Width: 13/16" (21 mm), Length: 6-11/16" (170 mm).
CALL box of 10
BL91510103 Stainless-Steel 13-1/2" Dia. 5 Spokes Steering Wheel for Boat
*Made of marine-grade stainless steel. *Size: 13-1/2", Shaft: 3/4", Dish: 25°.
CALL box of 10
BL74510136 Stainless-Steel 6 Holes Short Sided Door Hinge (3-7/8" ×1-1/2")
Made of Polished finish 304 stainless steel. Overall length: 97 mm /3-7/8 inch Short side length: 38 mm / 1-1/2 inch Long side length: 59mm /2-3/8 inch Width: 36.5mm /1-1/2 inch Thickness:2 mm /0.08 inch Screw holes diameter: 5.4 mm / 0.2 inch
CALL box of 20(10pair)
BL99576531 Stainless-Steel Adjustable Arms Folding Cup Drink Holder
*Made of Polished 304-grade stainless steel, specifically designed for marine applications *Please Note: We supply with screws. Closed Size: Length: 4", Height: 13/16", Width: 3-7/8", the arms diameter adjusts from 2-5/8" to 3-1/2".
CALL box of 10
BL99510131 Stainless-Steel Adjustable Folding Cup Drink Holder 2-1/8"-3-3/8"
*Made of Polished finish 304-grade stainless steel, specifically designed for marine applications *Please Note: We supply with screws. Closed Size: Length: 4", Height: 13/16", Width: 3-7/8". Adjustable retainer arms diameter from 2-1/8" to 3-3/8".
CALL box of 10
BL22510130 Stainless-Steel Bimini Top Quick Release Ball Pin 1/4"
Made of Polished finish 304-grade stainless steel, corrosion resistant and durable. Diameter: 1/4", Grip: 1".
CALL box of 10
BL22586330 Stainless-Steel Boat Bimini Top Quick Disconnect Pin with Cable
Made of Polished finish 304-grade stainless steel, corrosion resistant and durable. Cable with Nylon Coated; Pin diameter: 1/4", Grip: 1".
CALL box of 10
BL22510111 Stainless-Steel Boat Bow Anchor Roller/ Lift Roller (6-1/2 inch)
BLUE WHALE Marine Stainless-Steel Boat Bow Anchor Roller/ Lift Roller (SIZE:6-1/2 inch)
CALL box of 50
BL31576567 Stainless-Steel Clamp-on Fishing Rod Holder for Rail (L)
Marine Boat Stainless-Steel Clamp-on Fishing Rod Holder for Rail 1-1/4"-2" dia. Length:9-1/2", Liner inside diameter: 1-3/4".
CALL box of 10
BL31588467 Stainless-Steel Clamp-on Fishing Rod Holder for Rail (M)
*Clamp-on Rod Holder is made of Polished finish 316-grade stainless steel, Rubber insert to protect your fishing rod from any wear against the stainless surface. *Adjustable for rails 1" to 1-1/2" diameter.Length:9-1/2", Liner inside diameter: 1-3/4".
CALL box of 10
BL31585567 Stainless-Steel Clamp-on Fishing Rod Holder for Rail (S)
*Can be mounted to vertical or horizontal rails - Adjustable for rails 7/8?to 1? diameter. *Length:9-1/2", Liner inside diameter: 1-3/4".
CALL box of 10
BL96573082 Stainless-Steel Cup Drink Holder with Center Drain Hole
*Made of polished finish 304-grade stainless steel. *Size: Top Diameter: 4-1/4 inch / 108 mm, Bottom Diameter: 2-7/8 inch / 72 mm, Depth: 3-1/4 inch / 82 mm.
CALL box of 10
BL13295561 Stainless-Steel Deck Plate Key
*Made of 304 Stainless Steel *Length: 7"
CALL box of 10
BL99310257 Stainless-Steel Drink Cup Holder with Drain -3 LED Blue
Made of high polished stainless steel for supreme corrosion resistance. Height: 3-1/4", LED: 12V,1W, LED Color: Blue, Flange: 4-1/4", Barb: 3/8"
CALL box of 10
BL22510104 Stainless-Steel Fairlead Boat Bow Anchor Roller Holder Mount 200m
Made of Highly polish Mirror finish 304 Grade Stainless Steel
CALL box of 10
BL77510139 Stainless-Steel Flush Mount Rod Holder- 30 Degree
*Made of Stamped 304 Stainless Steel & PVC Liner. *Length: 9", Inside Diameter: 1-1/2", Flange: 30 Degree. *PVC insert to protect your fishing rod from any wear against the stainless surface.
CALL box of 10
BL12265532 Stainless-steel Hatch Cover Pull
Diameter:1/4?(6.4mm), Length: 2? (50.8mm), Base Diameter: 1-1/4? (31.8mm)
CALL box of 10
BL29510177 Stainless-Steel Hatch Lift Handle/Ring Pull (3 inch ×2-1/4 inch)
Made of high quality 304 stainless steel.
CALL box of 10
BL29510115 Stainless-Steel Hatch Spring Holder 10-1/4" with Fork and U-bolt
*Marine Stainless-Steel Hatch Spring Holder 10-1/4" with Fork and U-bolt Support Plate. *Diameter: 14.5 mm/9/16 inch, Length: 260 mm/ 10-1/4 inch. *Made of 304-grade Stainless Steel, Suitable for both indoor and outdoor use, ideal for harsh environments such as yachts and boats.
CALL box of 10
BL29510105 Stainless-Steel Outboard Engine Lock with Keys
*Made of Polished finish 304-grade stainless steel. *Length 12", Width 1.56", Height 1.83". *The two halves of the lock have sponge linings to reduce rattling vibrations when engine is running.
CALL box of 10
BL79510151 Stainless-Steel Outboard Motor Bracket Up To 20 HP
*Made of Stamped 304 Stainless Steel, Spring loaded 4 vertical position adjustable bracket. *HP Rating: To 20 HP, Mounting Size: 8" ×8-5/8", Broad Size: 8-1/4" *10-3/8", Base M?TL: Plastic. *Suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs).
CALL box of 10
BL96560529 Stainless-Steel Oval Grab Handle/Handrail with Flange & Studs 8"
Made of Polished finish 304 grade stainless steel, durable and corrosion resistant.
CALL box of 10
BL74510119 Stainless-Steel Polished Door Butt Hinge 3" x 1-1/2"
*Made of Polished 304-grade stainless steel Thickness:2 mm / 0.08 inch Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL29562461 Stainless-Steel Rail Mount Flag Staff for Pole Flag 12"X18"
BLUE WHALE Boat Stainless-Steel Rail Mount Flag Staff for Pole Flag *The flag size is 12" (Width) X 18" (Length), Pole Length 15-3/16".
CALL box of 10
BL29570161 Stainless-Steel Rail mount flag staff Pole with adjustable Clamps
Boat Stainless-Steel Rail mount flag staff Pole with adjustable Clamps and Split Clips. Made of Polished finish 304-grade stainless steel, 15-3/16" length, Rail clamp for to 7/8" or 1" diameter rails. The Flag clamps can be adjusted from 0.6" (15 mm) to 11"(280 mm).
CALL box of 10
BL77510123 Stainless-Steel Rectangle Stamped Louvered Vent (9-1/8"× 5")
*Made of Stamped 304 Stainless Steel. *Width: 115 mm (4-1/2 inch), Length: 231.8 mm (9-1/8 inch), Thickness: 0.8 mm (0.03 inch).
CALL box of 10
BL77510123 Stainless-Steel Rectangle Stamped Louvered Vent (9-1/8"× 5")
*Made of 304 Stainless Steel. *Width: 115 mm (4-1/2 inch), Length: 231.8 mm (9-1/8 inch), Thickness: 0.8 mm (0.03 inch).
CALL box of 10
BL12510102 Stainless-Steel Rectangular Spring Loaded Flush Lift Handle-L
Marine Boat 304 Stainless-Steel Rectangular Spring Loaded Flush Lift Handle(SIZE: 2.6 inch×2.2 inch)
CALL box of 10
BL12510106 Stainless-Steel Rectangular Spring Loaded Flush Lift Handle-S
Marine Boat 304-Stainless-Steel Rectangular Spring Loaded Flush Lift Handle (SIZE:1.7 inch ×1.5 inch)
CALL box of 10
BL79510194 Stainless-Steel Removable Table Bracket-Set of 4
Made of Polished 304-grade stainless steel. Wall Bracket: 2-1/8" ×3-3/8", Table Bracket: 1-3/4" ×2-3/4".
CALL box of 10
BL77510126 Stainless-Steel Round Louvered Vent (Dia.: 4")
Made of Polished finish 304-grade stainless steel. Small Diameter:4" (100.0 mm), Middle Diameter:5" (130.0 mm), Large Diameter:6" (153.0 mm), Thickness:0.04" (1 mm), Screw holes diameter: 3.5 mm / 1/8". We sell 3 different sizes.
CALL box of 10
BL77250226 Stainless-Steel Round Louvered Vent (Dia.:5")
Made of Polished finish 304-grade stainless steel. Middle Diameter:5" (130.0 mm), Thickness:0.04" (1 mm), Screw holes diameter: 3.5 mm / 1/8". We sell 3 different sizes.
CALL box of 10
BL77310626 Stainless-Steel Round Louvered Vent (Dia.:6")
Made of Polished finish 304-grade stainless steel. Large Diameter:6" (153.0 mm), Thickness:0.04" (1 mm), Screw holes diameter: 3.5 mm / 1/8". We sell 3 different sizes.
CALL box of 10
BL74510121 Stainless-Steel Round Side Door Strap Hinge 5-5/8" ×1-1/2"
*Made of polished finish marine-grade stainless steel. *Ideal for the door, cabinet doors, hatches and a wide variety of uses. *Length:5-5/8 inch /143 mm, Width: 1-1/2 inch /38.1 mm, Thickness: 2 mm.
CALL box of 50
BL77510152 Stainless-Steel Safety Locking Hasp with 2 keys
Made of Polished finish 304-grade stainless steel.Width: 1-1/8" (29 mm) Length: 3" (76 mm)
CALL box of 10
BL74510124 Stainless-Steel Short Side Offset Hinge 2-5/8" × 1-7/16"
Made of polished finish 304 stainless steel. Screw holes diameter: 5.4 mm/ 0.2 inch
CALL box of 20(10pair)
BL77510140 Stainless-Steel Slide Mount Removable Fishing Rod Holder
Made of Polished finish 304-grade stainless steel. Holder Bevel Angle: 40 degrees, Screw holes diameter: 0.3?/ 7.4 mm.
CALL box of 10
BL79572595 Stainless-Steel Table Bracket - Short Release Arm, L:12",551LB
*The supporting arm is 12? long, and height that fixed on the wall is 6-1/2?, folding shelf support can be folded down and out of the way smoothly in your convenience. The max load is 551LB/250KG for sustaining large pressure.
CALL box of 10
BL79573195 Stainless-Steel table bracket-Long Release Arm, L:12",551LB
*The supporting arm is 12? long, and height that fixed on the wall is 6-1/2?, folding shelf support can be folded down and out of the way smoothly in your convenience. The max load is 551LB for sustaining large pressure.
CALL box of 10
BL29510140 Stainless-Steel Telescoping Hatch/Window Adjuster & Stay Support
Marine Stainless-Steel Heavy-Duty Boat Telescoping Hatch/Window Adjuster and Stay Support, Length: 10" to 17"
CALL box of 10
BL29510141 Stainless-Steel Telescoping Hatch/Window Adjuster & Stay Support
Stainless-Steel Heavy-Duty Telescoping Hatch/Window Adjuster and Stay Support - 13 inch to 23.5 inch
CALL box of 10
BL32580665 Stainless-Steel Thick Ring Sail Shade Pad Eye Plate Rigging (M)
We have 3 sizes,this is Medium size.Made of Bright polished 304 marine grade stainless steel,Screw holes diameter:4.5 mm / 0.17 inch
CALL box of 10
BL32580865 Stainless-Steel Thick Ring Sail Shade Pad Eye Plate Rigging(L)
We have 3 sizes,this is Large size.Screw holes diameter:6.5 mm / 0.26 inch
CALL box of 10
BL32580565 Stainless-Steel Thick Ring Sail Shade Pad Eye Plate Rigging(S)
Made of Bright polished 304 marine grade stainless steel.We have 3 sizes,this is small size.Screw holes diameter:4.5 mm / 0.17 inch.
CALL box of 10
BL78310104 Stainless-Steel Waterproof Flush Mount Stern LED
*Made of Polished finish 304-grade stainless steel. *Lens: White, Base Diameter: 3", LED: 12V,18W. *Durable Light Body: Durable clear plastic lens. *Ideal for interior compartment light, cockpit light and a wide variety of uses.
CALL box of 10
BL29510131 Tapered Conical Soft Wood Plugs (Set of 10)
A set of 7 different sizes,10 pcs.
CALL box of 10
BL74260206 Teak Boat Steering Wheel Center Cap
*Made of Teak. *For use with destroyer style steering wheels. *Face diameter: 2-3/4"; Insert diameter: 2-1/2"; Insert depth: 1/2".
CALL box of 10
BL99575324 Teak Inboard Boat Swim Platform with 3 Steps Ladder & 2 Rails
*Rail Handle are made of marine-grade stainless steel, swim platform is made of teak. *Teak Swim Platform size is 18" W ×14" D ×1.5" T. *Fast shipping! we shipping from US! *Only provide assembly hardware, no mounting hardware!
CALL box of 10
BL32615715 Tire up to 20" Orange Wheel Chocks (8-5/8" × 5" × 4-1/4")
*Ideal for Trailers, Vans, Cars, RVs and a wide variety of uses. *Distinctive bright orange color catches your eye; Curved surface for easy placement into wheels. *Length: 8-5/8", Width:5", Height: 4-1/4".
CALL box of 10
BL85570285 Vertical Stanchion Rail Mount Anchor Bracket / Holder
Mounts securely to any 7/8" to 1" vertical stanchion. Anchors up to 35 lbs. are held away from rail, grips anchor securely to any horizontal rail
CALL box of 10
BL77616141 White Nylon Flush Mount Rod Holder/ U.V. Stabilized with Cover
*Made of Injection Molded Nylon W/ PVC Cover. *Includes the cap cover with a rubber base gasket, it is ideal for kayak, canoe, boat etc. *BLUE WHALE Nylon Flush Mount Rod Holder is Durable, strong, lightweight and portable to carry. *Length: 10", Inside Diameter: 1-3/4", 30 Degree angle head.
CALL box of 10
BL31615873 White Plastic Cup Drink Holder with Center-drain hole
Made of Molded inject plastic. Size: Top Diameter: 11 cm/4.3", Bottom Diameter: 7 cm/2.8", Depth: 8 cm/3.1", Drain Hole Diameter: 8 mm / 3/8".
CALL box of 10
BL32310114 White Single COB Chip LED Festoon Light (DC 12V,1.5W)
Overall length: 31 mm, Led Quantity: 1 COB Chip, Voltage: DC12V, Electric current: 60 mA, Electric power: 1.5 W, Color: Warm White.
CALL box of 50


Return to our main website at https://www.wholesalecentral.com/marinehardware88